Second build

bairboy · Post by **bairboy** » December 14th, 2018, 1:32 am

It’s been a while since I posted anything. I have built a second smoker she cooks amazing. My first smoker was a 500 gallon I figured it was to big so I sold it and built a smaller one. I miss the space so I’m adding to this one a warming cabinet, which I plan to cook with. I have ordered insulation. I’m going to insulate the firebox then build the cabinet. I have stripped it down and cut off the end of the tank. I need to polish her up a bit and wait for the insulation.

Chromeski · Post by **Chromeski** » December 14th, 2018, 2:10 am

Looks good. Still a big smoker

bairboy · Post by **bairboy** » December 20th, 2018, 4:43 pm

Progress. I am still waiting on my insulation. I have cut out most the cabinet will weld together as soon as I get the insulation. I also need to go purchase a piece of steel.

bairboy · Post by **bairboy** » December 20th, 2018, 4:44 pm

I am wrapping the firebox so I’ve got 3 inches bigger to accommodate for that you can see from the top plate

Post by **Big T** » December 20th, 2018, 10:19 pm

ajfoxy · Post by **ajfoxy** » December 21st, 2018, 3:38 am

Looking good so far... even if it is hanging from the ceiling.

bairboy · Post by **bairboy** » December 22nd, 2018, 1:26 am

Got my insulation should get it all wrapped tomorrow.not sure why it turns the picture sideways but you get the idea.

ajfoxy · Post by **ajfoxy** » December 22nd, 2018, 2:34 am

I'm guessing it's the way you hold the phone when taking pics. Try different rotations and see if that helps.

bairboy · Post by **bairboy** » January 23rd, 2019, 11:02 pm

Smokers coming a long. just need doors shelves and finish dampers and the cabinet will be operational.

Post by **Big T** » January 24th, 2019, 5:55 pm

It's coming along nicely

ajfoxy · Post by **ajfoxy** » January 25th, 2019, 2:33 am

Definitely getting there...

bairboy · Post by **bairboy** » February 17th, 2019, 12:49 pm

I am now able to smoke in the main cook chamber. Then continue to work on the WC. Tomorrow I get to go pick up the rest of the steel. The door is big so I have to buy a half sheet of quarter inch plate to be able to cut it out. Then I just need to build the shelves and will be able to cook for more than 100+ people that’s the goal. I could only get 65-70 before the add on.

I sure love bbq.

bairboy · Post by **bairboy** » February 17th, 2019, 12:51 pm

bairboy wrote: ↑
February 17th, 2019, 12:49 pm
I am now able to smoke in the main cook chamber. Then continue to work on the WC. Tomorrow I get to go pick up the rest of the steel. The door is big so I have to buy a half sheet of quarter inch plate to be able to cut it out. Then I just need to build the shelves and will be able to cook for more than 100+ people that’s the goal. I could only get 65-70 before the add on. I sure love bbq.

Man I don’t know why every picture show up upside down sorry I’m not good with electronics. Just stand on your head.

Post by **Big T** » February 17th, 2019, 9:26 pm

Tjam9 · Post by **Tjam9** » February 18th, 2019, 12:22 am

SmokerBuilder.com

Second build

Second build

Re: Second build

Re: Second build

Re: Second build

Re: Second build

Re: Second build

Re: Second build

Re: Second build

Re: Second build

Re: Second build

Re: Second build

Re: Second build

Re: Second build

Re: Second build

Re: Second build