Well i cut the doors out around the hinges already. I the only portion on both doors that are not cut are the bottoms. My plan was to weld on all the door flanges start a big ass fire inside , let cool then cut the bottoms and weld on the flanges on the bottom.dacolson wrote: ↑September 21st, 2020, 2:50 pmI’d cut the hinges off too. They’re going to be hard to deal with while you cut the door and if it springs at all you’ll need to take the door off anyway. Also if you plan on putting flanges around the outside with gaskets you’ll have to redo the hinges anyway.