Three Reverse flow somkers finished pics by TQ and Tyler

TuscaloosaQ · Post by **TuscaloosaQ** » March 30th, 2013, 7:18 pm

Well here you go they are done and so am I!!!!!

All three together, Tyler built the patio models

this is my favorite cooker to date it has tons of volume and is very versitile

the warmer has a removeable charcoal grate with a ash pan under it for dedicated cooks in the warmer ie you have a verticle cooker too. The charcoal grate can be removed and replaced with another grate.

That is TQ holding the cooker up with 1 finger.... That is perfect tongue weight

Big Red and Tq Red is as happy as a gopher in soft dirt

that cooker will almost hold as much food as a 250 build. I ran it for several hours and the temps were dead up even across cooker. I even took it up to 350 degrees no problem!!!!!

The next pics are of Tylers stuff, dang if he aint teaching me stuff now!!!!! Heck that is a blessing in my opinion!!!!

Tyler was taliking about buying casters but when he saw the price he whipped these up and I mean quick.. I like em

A couple of Tylers recent bumpers

http://s1053.photobucket.com/user/Tusca ... 3.jpg.html

That is it folks!!!!!

alleyrat58 · Post by **alleyrat58** » March 30th, 2013, 7:55 pm

...starts slow clap, wipes tear from eye.

Amazing work, fellers!

El Gato · Post by **El Gato** » March 30th, 2013, 7:56 pm

They sure are nice lookin!
Were these plans you got here from the site??
What paint did you use for them?
How did you make the wheels?

This makes me want to build one asap!
I hope to have time in the next several weeks to start a pit,
Just haven't figured which one yet.

TuscaloosaQ · Post by **TuscaloosaQ** » March 30th, 2013, 8:04 pm

1. No I did not get plans from the site been a fabricator for many years and keep my eyes peeled. I do reccomend getting plans from the site tho if you have never built a cooker.... as far as that goes even if you have not!!!!!!
2.the wheels are made od 8" pipe and 3/8 rod for the spokes. Tyler made an axel and used tractor pins and eyelets to pin the wheel to axel.
3 The paint is primer: inorganic zinc and top coat high temp paint. I am not going to disclose where I bought it yet for personal reasons..... but I thinks it is going to be the truth!!!

Smokeone · Post by **Smokeone** » March 30th, 2013, 8:47 pm

You two seem to have something new and better every time.
As usual outstanding job! :LG:

KenV · Post by **KenV** » March 31st, 2013, 1:19 am

Wow, pieces of art!

TuscaloosaQ · Post by **TuscaloosaQ** » March 31st, 2013, 5:40 am

Thanks Ken, Gato, smokeone, alleyrat, Kinda funny on another forum someone was questioning the tongue weight of the trailer... Ignorance is blissful.... I have built trailers for over 30 years I very well know about the 60/40 tongue weight but as in everthing there is a +and- factor to evrything. In the pic I was illustrating after you get to the cooker to the tip point mamma could move the trailer around no problem. Got to work this morning and the buyer was commenting on how good it pulled. It did not surprise me at all Heck I built it that way!!!!!!!!!!!!!!! Goofy people annoy me!!!!!!

Post by **Rodcrafter** » March 31st, 2013, 7:09 am

TQ,

I really like the one you made the most for my own use, but as others have said you both do really nice work. And I bet "Big Red" is truly happy with that cooker. It doesn't even matter what something like this costs to me. I can spend way too much money on alot of things. But this is something that will be share by many people over the years. I would love to get one of those bumpers for my 2009 F-150 front and back. Maybe Tyler could PM me the info.

YouTube · Post by **Frank_Cox** » March 31st, 2013, 7:18 am

Looks great brother! I need to do the squared off doors sometime! Paint looks great too!

SmokinFF · Post by **SmokinFF** » March 31st, 2013, 8:48 am

You guys never half a** it. Each one I see is better than the last. Keep it up fellas!

TuscaloosaQ · Post by **TuscaloosaQ** » March 31st, 2013, 1:40 pm

Frank_Cox, SmokinFF,Rodcrafter Thanks for the Kudos .....Rodcrafter i am sure tyler would be more than happy to talk bumpers

Gizmo · Post by **Gizmo** » March 31st, 2013, 7:32 pm

Beautiful work TQ!

Grabber70Mach · Post by **Grabber70Mach** » April 1st, 2013, 8:06 am

Very nice TQ, I couldn't even put my big toe in the circle of quality you two achieve.

TuscaloosaQ · Post by **TuscaloosaQ** » April 1st, 2013, 9:09 am

Thanks Rick and Grabber for the nice comments especially from people that do quality work also

The Czar · Post by **The Czar** » April 1st, 2013, 10:28 am

we are not worthy to look up and gaze at the amazment and wonder that is TQ cookers and Tyler bumpers

TuscaloosaQ · Post by **TuscaloosaQ** » April 1st, 2013, 11:15 am

Dc quit it!!!!!!! you got me strutting around like a rooster..... I might get shot turkey season just came in, in Alabama!!!!!!

Jethro · Post by **Jethro** » April 5th, 2013, 8:20 pm

Very nice!!!!!

maccas66 · Post by **maccas66** » April 11th, 2013, 1:37 am

They all look great!!!, I really like the big gauges, you don`t even have to get up to see the temps!

Gizmo · Post by **Gizmo** » April 11th, 2013, 6:46 am

... and we all know it's all about NOT getting up with mac ...

maccas66 · Post by **maccas66** » April 11th, 2013, 8:27 pm

it`s called Chillaxing Rick

Gizmo · Post by **Gizmo** » April 11th, 2013, 8:47 pm

I've heard of hot waxing ....

The Czar · Post by **The Czar** » April 12th, 2013, 7:00 am

I've heard of a Cleveland Steamer....

Sent from my iPhone using Forum Runner

Gizmo · Post by **Gizmo** » April 12th, 2013, 7:16 am

I'm not even going to ask....

Miketheforester · Post by **Miketheforester** » April 12th, 2013, 7:23 am

Holy crap czar... You got me the first laugh of the day.

Grabber70Mach · Post by **Grabber70Mach** » April 12th, 2013, 7:57 am

dcman (The Czar) wrote:I've heard of a Cleveland Steamer....

Sent from my iPhone using Forum Runner

TMI

SmokerBuilder.com