350 gallon new build

lostbuckaroo · Post by **lostbuckaroo** » January 30th, 2013, 1:33 am

gatewood iron wrote:
welder 005.jpg
welder 006.jpg

This is an awesome intake design! Do you mind if I use it!? How does it work? I've got a smaller patio build going and been looking for a different fresh air intake design

gatewood iron · Post by **gatewood iron** » January 30th, 2013, 6:48 am

lostbuckaroo wrote:
gatewood iron wrote:
welder 005.jpg
welder 006.jpg
This is an awesome intake design! Do you mind if I use it!? How does it work? I've got a smaller patio build going and been looking for a different fresh air intake design

This isn't my design Buckaroo.I saw it on another cooker and thought the same thing you did. The caps are welded to a piece of 1/2" all thread which runs through a nut welded on a plate that is welded on the inside of the pipe. Just screw it in or out according to the desired intake.

Post by **Rodcrafter** » January 30th, 2013, 7:09 am

You are doing nice work, I was wondering is there a way to clean ash out of the fire box? I only say that because the door is so far from the bottom and looks small in the picture. Over all this is going to be a nice rig.

gatewood iron · Post by **gatewood iron** » January 30th, 2013, 1:23 pm

Rodcrafter wrote:You are doing nice work, I was wondering is there a way to clean ash out of the fire box? I only say that because the door is so far from the bottom and looks small in the picture. Over all this is going to be a nice rig.

My plan is to cut a space for an ash pan that can also be used as an extra vent if needed.

lostbuckaroo · Post by **lostbuckaroo** » January 30th, 2013, 6:43 pm

gatewood iron wrote:
lostbuckaroo wrote:
gatewood iron wrote:
welder 005.jpg
welder 006.jpg
This is an awesome intake design! Do you mind if I use it!? How does it work? I've got a smaller patio build going and been looking for a different fresh air intake design
This isn't my design Buckaroo.I saw it on another cooker and thought the same thing you did. The caps are welded to a piece of 1/2" all thread which runs through a nut welded on a plate that is welded on the inside of the pipe. Just screw it in or out according to the desired intake.

Got it! I'm usin it!!

gatewood iron · Post by **gatewood iron** » January 30th, 2013, 6:47 pm

Have at it bud.

gatewood iron · Post by **gatewood iron** » January 30th, 2013, 6:56 pm

Here is my combo grill fitted up to the trailor. Lot more tongue weight now. It was originaly for my outdoor kitchen this summer but I wanted to change things (wife doesn't know yet).

Clover Ridge Smokers · Post by **Clover Ridge Smokers** » January 30th, 2013, 8:27 pm

Looking good. I'm still a couple of weeks away from getting back to my build. Just too many other commitments this time of year.

Post by **Tom_Heath** » January 30th, 2013, 10:20 pm

Isnt it awesome when the wife doesnt know yet ,,, LOL

gatewood iron · Post by **gatewood iron** » February 1st, 2013, 6:10 pm

: My door latches on; latches 003_crop.jpg (12.03 KiB) Viewed 184 times

: latches 005_crop.jpg (11.77 KiB) Viewed 184 times

: Argentine grate started; latches 006.jpg (15.44 KiB) Viewed 184 times

I shall call it the "Widow Maker" because my wife is going to kill me when she see's the combo grill on the side.

Clover Ridge Smokers · Post by **Clover Ridge Smokers** » February 1st, 2013, 8:53 pm

I learned over time to not to keep anything from my wife... The first wife cost me a TON of $$$. Got married again about 10 years ago and keep everything on the up and up with this one. Didn't realize life could be so good.

Due to these life lessons, I'm naming my new cooker " Second Chance"

gatewood iron · Post by **gatewood iron** » February 1st, 2013, 9:42 pm

Clover Ridge Smokers wrote:I learned over time to not to keep anything from my wife... The first wife cost me a TON of $$$. Got married again about 10 years ago and keep everything on the up and up with this one. Didn't realize life could be so good.

Due to these life lessons, I'm naming my new cooker " Second Chance"

Hell yeah!

The Czar · Post by **The Czar** » February 1st, 2013, 10:20 pm

Dang I love then spring handles....

Sent from my iPhone using Forum Runner

TuscaloosaQ · Post by **TuscaloosaQ** » February 2nd, 2013, 7:51 am

Looks really really great!!! you got some good ideas!!!!!!

gatewood iron · Post by **gatewood iron** » February 2nd, 2013, 9:52 am

Thanks guys. My Dad told me years ago " don't buy what you can build ". Thats where the latches come from. Studying the ones I've seen.

Post by **Tom_Heath** » February 9th, 2013, 6:17 pm

Well now, I sure dont hide stuff from her. LMAO just sometimes I dont go into great detail.

SmokerBuilder.com

350 gallon new build

Re: 350 gallon new build

Re: 350 gallon new build

Re: 350 gallon new build

Re: 350 gallon new build

Re: 350 gallon new build

Re: 350 gallon new build

Re: 350 gallon new build

Re: 350 gallon new build

Re: 350 gallon new build

Re: 350 gallon new build

Re: 350 gallon new build

Re: 350 gallon new build

Re: 350 gallon new build

Re: 350 gallon new build

Re: 350 gallon new build

Re: 350 gallon new build