Currently building a 325gal RF.

Post by **Rodcrafter** » April 30th, 2017, 4:46 pm

I framed my door with angle iron and used 2 toggle clamps but I really only use 1 I put 2 on it just in case

Making memories!

TheCapps · Post by **TheCapps** » April 30th, 2017, 6:24 pm

I going to come up with something using some more stainless bar keeping the same styling as the cc doors.

Sent from my iPhone using Tapatalk

HisBiggestFan! · Post by **HisBiggestFan!** » May 1st, 2017, 2:04 pm

[emoji106]

Sent from my iPhone using Tapatalk

TheCapps · Post by **TheCapps** » May 1st, 2017, 4:11 pm

Lol, let me properly introduce HisBiggestFan! That is my wife. She joined so she could get the detailed rundown on the smoker build. She's a beautiful patient lady, putting up with me putting a lot of hours into this rig after coming home from 10+HR work days. I love you HisBiggestFan!

Sent from my iPhone using Tapatalk

ajfoxy · Post by **ajfoxy** » May 1st, 2017, 4:14 pm

Nice.... team effort.

Squiggle · Post by **Squiggle** » May 1st, 2017, 4:41 pm

Awwe, that's too cool!

HisBiggestFan! · Post by **HisBiggestFan!** » May 1st, 2017, 4:45 pm

#HisBiggestFan!! All the way babe [emoji4]

Sent from my iPhone using Tapatalk

Smurf · Post by **Smurf** » May 1st, 2017, 7:37 pm

TheCapps · Post by **TheCapps** » May 1st, 2017, 7:41 pm

Three pipes. Got the top in the wc, and a stack tacked in.
Progress today was slow. It is crazy windy, screwing up my welding. Ripped my flag and broke my eagle from atop the pole.

That's an 8x12.

Sent from my iPhone using Tapatalk

Post by **Big T** » May 1st, 2017, 7:57 pm

Those triple stacks look good! The wind has been blowing like that down here for the last few days. It's always good to have the Mrs. on board with the build!

mp4 · Post by **mp4** » May 1st, 2017, 8:16 pm

TheCapps wrote:Lol, let me properly introduce HisBiggestFan! That is my wife. She joined so she could get the detailed rundown on the smoker build. She's a beautiful patient lady, putting up with me putting a lot of hours into this rig after coming home from 10+HR work days. I love you HisBiggestFan!

Sent from my iPhone using Tapatalk

Very cool intro!

Post by **Pete Mazz** » May 2nd, 2017, 3:57 am

Nice!!!

Post by **Rodcrafter** » May 2nd, 2017, 6:56 am

That's great to have the whole team on board. My wife calls my trailer rig the other woman.

Making memories!

Squiggle · Post by **Squiggle** » May 2nd, 2017, 7:43 am

Looking good dude, coming along nicely.

temurf · Post by **temurf** » May 2nd, 2017, 5:22 pm

That is really looking great.

And a big welcome to His biggest fan.

Sent from my Pixel XL using Tapatalk

TheCapps · Post by **TheCapps** » May 2nd, 2017, 6:24 pm

The eagle has landed.

Sent from my iPhone using Tapatalk

HisBiggestFan! · Post by **HisBiggestFan!** » May 3rd, 2017, 1:02 pm

Thanks guys! I appreciate the welcome and y'all letting me be a part. Interesting stuff, I hope to learn a little[emoji6]
So far I helped weld, or did I? Anyway, not as easy as I thought [emoji38]

Sent from my iPhone using Tapatalk

TheCapps · Post by **TheCapps** » May 3rd, 2017, 7:50 pm

Started on my wc door latch today. Here's where I am at so far:

I have two of these, one towards the top one towards the bottom.

I welded two little 3/16 pads onto the door,so the door paint won't end up scraping off with the slide action of the 1/4 flat bar.

Drilled a 1/2 hole through the door, 3/16 pad and the 1/4 flat bar. Then inserted a bronze bushing into the hole from the outside.

Ground down the excess bronze bushing material.

welded in a grade 5 3/8 bolt.

then topped it off with a stainless acorn nut.

I will have a stainless bar attached to both bars so I can pick up on the bar and pull the door open. I will weld something over the 1/4 flat bar so it can't be pulled and bent. It's a start. I think it will work out good.

Dreams don't come true...Until you wake up and go to work.

temurf · Post by **temurf** » May 3rd, 2017, 8:19 pm

I like the door latches.

Post by **Big T** » May 3rd, 2017, 8:44 pm

Nice

TheCapps · Post by **TheCapps** » May 3rd, 2017, 9:50 pm

Got some goodies in the mail today.

Dreams don't come true...Until you wake up and go to work.

Post by **Big T** » May 3rd, 2017, 10:01 pm

Sweet!!

ajfoxy · Post by **ajfoxy** » May 3rd, 2017, 11:04 pm

Coming along nicely. The latch assembly looks like it will be pretty neat.

Squiggle · Post by **Squiggle** » May 4th, 2017, 4:24 am

Very cool dude, nice work!

Post by **Rodcrafter** » May 4th, 2017, 10:53 am

SmokerBuilder.com

Currently building a 325gal RF.

Re: Currently building a 325gal RF.

Re: Currently building a 325gal RF.

Re: Currently building a 325gal RF.

Re: Currently building a 325gal RF.

Re: Currently building a 325gal RF.

Re: Currently building a 325gal RF.

Re: Currently building a 325gal RF.

Re: Currently building a 325gal RF.

Currently building a 325gal RF.

Re: Currently building a 325gal RF.

Re: RE: Re: Currently building a 325gal RF.

Re: Currently building a 325gal RF.

Re: Currently building a 325gal RF.

Re: Currently building a 325gal RF.

Re: Currently building a 325gal RF.

Re: Currently building a 325gal RF.

Re: Currently building a 325gal RF.

Re: Currently building a 325gal RF.

Re: Currently building a 325gal RF.

Re: Currently building a 325gal RF.

Re: Currently building a 325gal RF.

Re: Currently building a 325gal RF.

Re: Currently building a 325gal RF.

Re: Currently building a 325gal RF.

Re: Currently building a 325gal RF.