120 Gallon Patio Build

onesquin · Post by **onesquin** » September 18th, 2012, 5:15 pm

I bought three tanks to start making a few patio models. Here is the design I am thinking about. Cut the tank about 2/3rds and drop it down for the firebox. The chamber and firebox will be side open. The chamber will have 2 removable, sliding grates. Put this thing on pneumatic wheels and rubber coated casters with a shelf in front and bam, backyard braggin rights!!!

onesquin · Post by **onesquin** » September 18th, 2012, 5:18 pm

onesquin · Post by **onesquin** » September 18th, 2012, 5:22 pm

Any comments and feedback would be appreciated.

Smokeone · Post by **Smokeone** » September 18th, 2012, 6:20 pm

I like it. That looks to be a great size for a family Q.
It will definetly be a head turner on the patio.

SmokinFF · Post by **SmokinFF** » September 18th, 2012, 6:35 pm

I think it should work good. Go ahead and get it built and delivered. The first couple times I use it, I should be able to give you some feedback. Thanks in advance.

Gizmo · Post by **Gizmo** » September 18th, 2012, 6:37 pm

Well!

YouTube · Post by **Frank_Cox** » September 18th, 2012, 6:48 pm

I like it!
I would prolly cut off the endbell for the FB so you could make a flat round door and use it for a fire ring/ cowboy cooker.

onesquin · Post by **onesquin** » September 19th, 2012, 7:55 am

SmokinFF wrote:I think it should work good. Go ahead and get it built and delivered. The first couple times I use it, I should be able to give you some feedback. Thanks in advance.

Sounds good, I'll give one to you free provided you give me feedback and pay for the $1300 dollars for shipping!!!

OKIECOOKER · Post by **OKIECOOKER** » September 19th, 2012, 8:22 am

I like Franks idea. Looks as if you have it all figured out.Can't wait to see the build in progress

SmokinFF · Post by **SmokinFF** » September 19th, 2012, 8:26 am

That's a good deal, right?!?! Free smoker, just pay shipping and handling.

SoloQue · Post by **SoloQue** » September 19th, 2012, 2:29 pm

SmokinFF wrote:That's a good deal, right?!?! Free smoker, just pay shipping and handling.

I thought the first one was $5 and the 2nd one was free if you just pay the 1300 S&H on each ... man I got ripped off $5!

onesquin · Post by **onesquin** » October 14th, 2012, 4:20 pm

All the supplies have been ordered. The steel will get picked up this week and I am building one of these next Sunday. Can't wait.

Post by **Rodcrafter** » October 15th, 2012, 7:24 am

I like the idea. Get it going and many pics please.

YouTube · Post by **Frank_Cox** » October 15th, 2012, 8:27 am

sounds good buddy! I will be watching!

onesquin · Post by **onesquin** » October 26th, 2012, 11:42 pm

It's done. Started last Sunday and got it done tonight. Everything went well except the dampers. Was going to go with two round spin out dampers but I didn't have the patience to make them work. Went to rectangular and laid the hole out wrong and panicked and it looks like hammered shit but is functional. The bottom rack is 2 x 2 ft. Enjoy.

Jethro · Post by **Jethro** » October 27th, 2012, 5:24 am

Nice job!!! :LG:

The Czar · Post by **The Czar** » October 27th, 2012, 6:56 am

SWEET!!!!!!!!!!!!!!!!!!!!!!!!!!! :LG:

Post by **Rodcrafter** » October 27th, 2012, 9:38 am

I think you did great. I never seem to make anything in a week. I started making a log splitter last week, it will probibly be another month before I'm done. Looking at these smaller units make me want one. :LG:

SMOKIN JAY · Post by **SMOKIN JAY** » October 27th, 2012, 9:56 am

Smokeone · Post by **Smokeone** » October 28th, 2012, 2:35 pm

Week? Heck it would of taken me a year!

Gizmo · Post by **Gizmo** » October 28th, 2012, 8:54 pm

That's a sharp looking build there!

SMOKIN JAY · Post by **SMOKIN JAY** » October 28th, 2012, 9:00 pm

YouTube · Post by **Frank_Cox** » October 31st, 2012, 6:55 pm

very very nice build OS!
very simple and economic build! :LG:

The Bax · Post by **The Bax** » November 8th, 2012, 6:21 pm

would appreciate an update on how the smoker works. I have two takes with the same dimension and may use the same design.

lostbuckaroo · Post by **lostbuckaroo** » January 3rd, 2013, 9:03 pm

The Bax wrote:would appreciate an update on how the smoker works. I have two takes with the same dimension and may use the same design.

What he said!

Also what was the wall thickness on your tank?

SmokerBuilder.com

120 Gallon Patio Build

120 Gallon Patio Build

Re: 120 Gallon Patio Build

Re: 120 Gallon Patio Build

Re: 120 Gallon Patio Build

Re: 120 Gallon Patio Build

Re: 120 Gallon Patio Build

Re: 120 Gallon Patio Build

Re: 120 Gallon Patio Build

Re: 120 Gallon Patio Build

Re: 120 Gallon Patio Build

Re: 120 Gallon Patio Build

Re: 120 Gallon Patio Build

Re: 120 Gallon Patio Build

Re: 120 Gallon Patio Build

Re: 120 Gallon Patio Build

Re: 120 Gallon Patio Build

Re: 120 Gallon Patio Build

Re: 120 Gallon Patio Build

Re: 120 Gallon Patio Build

Re: 120 Gallon Patio Build

Re: 120 Gallon Patio Build

Re: 120 Gallon Patio Build

Re: 120 Gallon Patio Build

Re: 120 Gallon Patio Build

Re: 120 Gallon Patio Build