Last Chance To Tell Me What You Think!

[J.R.'s Butt Hutt]

Take a look at my crude drawings (click the pics and they will enlarge)and tell me if you you think they will work! The following is a little extra info for your mental calculations.
Tank: 400gal Boiler tank 1/4" thick wall
Firebox: 26" dia steel pipe 3/8" thick wall 72" long. By the pit calculator, the firebox is at 113% not taking into account for the flat firebox top.
Warming box: roughly 66"wide x 36" tall x 18" to 24" deep, 3/16" deck plate
Firebox opening with damper 6" x 50" (square inches per calculator)
Tuning plates/ RF plate/charcoal tray: 6" x 1" x 1/4" formed channel can be clamped together to form RF plate that can double as a charcoal tray for grilling, or loosened up and spread apart for tuning plates.
Air Intake: 4 separate 3 5/8" draft knobs
Smoke Stacks: (2) 5 inch dia, 48inch high, one on each end of the cook chamber

Let me hear what you think!

[Rodcrafter]

I think it will cook nice and as long as you put controls on stacks you could cook small or large amounts. Go for it and don't forget the pics.

[TuscaloosaQ]

Looks good to me

[Clover Ridge Smokers]

It definitely will cook some meat. Hard to tell from the drawing, but watch the weight distribution on the trailer.

[Smokeone]

Should be a nice cooker.

[J.R.'s Butt Hutt]

Thanks for the last minute once over!

J.R.