60x24 RF Build

SOILhunter · Post by **SOILhunter** » April 14th, 2018, 5:51 pm

Hey guys, long time no post for me but starting a new build, I figured I better share some pics! Since “Mack” is such a big hit I figured I better go for the same design, just a little bigger. 60x24x24 cook chamber with a 36x24x24 WC. I cut everything I could last night on the plasma table and threw it together this morning, 4 hours into the build so far minus the cutting.

Post by **Rodcrafter** » April 14th, 2018, 5:53 pm

Wow, you’re getting it done!

Sent from my iPhone using Tapatalk

MattJ · Post by **MattJ** » April 14th, 2018, 5:56 pm

Post by **Big T** » April 14th, 2018, 6:30 pm

That's going to be a fine smoker!

Dirtytires · Post by **Dirtytires** » April 14th, 2018, 8:53 pm

Great progress

bstory · Post by **bstory** » April 14th, 2018, 10:04 pm

Oh man, nice work.

Sent from my iPhone using Tapatalk Pro

ajfoxy · Post by **ajfoxy** » April 14th, 2018, 11:25 pm

Very nice.

Post by **Rodcrafter** » April 15th, 2018, 7:56 am

Makes me want to build one or 2. Lol

Sent from my iPhone using Tapatalk

SOILhunter · Post by **SOILhunter** » April 20th, 2018, 5:16 pm

Got to spend a couple more hours on the build this evening. Insulation and inner walls of the firebox are in as well as all of the angle for the doors. Overall I think it’s comong along pretty well, one of the easiest cookers I have built.

Post by **Big T** » April 20th, 2018, 6:02 pm

bstory · Post by **bstory** » April 21st, 2018, 1:38 pm

That sucker is coming together.

Sent from my iPhone using Tapatalk Pro

Post by **Rodcrafter** » April 23rd, 2018, 1:35 pm

MattJ · Post by **MattJ** » April 24th, 2018, 9:10 pm

What is a ball part figure on the steel for this build? I am getting a quote on material for a Mack build. I know steel prices may have increased since you got your material but just wondering for comparison.

SOILhunter · Post by **SOILhunter** » April 28th, 2018, 9:04 am

Mine is a little bigger than Mack but mainly just increases the length a little. Ive used up almost every bit of 2 5x10s and part of a 4x8, I should be able to get the doors from the rest of the 4x8, I hope. The 4x8 I already had on hand but the 2 5x10s were $764 total.

Thanks guys, haven’t had much time for the build lately with turkey season going on here but should be able to get back to it soon!

SOILhunter · Post by **SOILhunter** » May 19th, 2018, 8:31 pm

Was able to work on the build for a few hours today. I was able to get the trailer up enough to be able to move this little guy around...not leaving at that height I just ran out of time again! Also got all of the racks cut so I can throw them together after work one day.

I can’t add the last pic for some reason, keep getting an error, sorry guys

Post by **Big T** » May 19th, 2018, 9:32 pm

ajfoxy · Post by **ajfoxy** » May 20th, 2018, 3:02 am

Looking good.

Post by **Rodcrafter** » May 20th, 2018, 2:25 pm

Oh yeah

Sent from my iPhone using Tapatalk

SOILhunter · Post by **SOILhunter** » June 22nd, 2018, 2:52 pm

Getting a little work done today...trying to get the doors finished up!

SOILhunter · Post by **SOILhunter** » June 22nd, 2018, 3:41 pm

Copper dampers just because...I’ll bend the tabs down after they are finished.

SOILhunter · Post by **SOILhunter** » June 22nd, 2018, 4:30 pm

One more down...I’ll save the CC doors for another day.

Post by **Big T** » June 22nd, 2018, 4:34 pm

Cool looking pin wheels

ajfoxy · Post by **ajfoxy** » June 22nd, 2018, 4:53 pm

very flash indeed.

Post by **Rodcrafter** » June 27th, 2018, 9:42 am

SOILhunter · Post by **SOILhunter** » June 27th, 2018, 7:17 pm

CC Doors are built and hung so now it’s down to the little stuff

SmokerBuilder.com

60x24 RF Build

60x24 RF Build

Re: 60x24 RF Build

Re: 60x24 RF Build

Re: 60x24 RF Build

Re: 60x24 RF Build

Re: 60x24 RF Build

Re: 60x24 RF Build

Re: 60x24 RF Build

Re: 60x24 RF Build

Re: 60x24 RF Build

Re: 60x24 RF Build

Re: 60x24 RF Build

Re: 60x24 RF Build

Re: 60x24 RF Build

Re: 60x24 RF Build

Re: 60x24 RF Build

Re: 60x24 RF Build

Re: 60x24 RF Build

Re: 60x24 RF Build

Re: 60x24 RF Build

Re: 60x24 RF Build

Re: 60x24 RF Build

Re: 60x24 RF Build

Re: 60x24 RF Build

Re: 60x24 RF Build