I would suggest you buy Frank's kit - prolly the lowest priced way to get going - excellent experience available here on operation of it and with a decent coat of paint and keeping it covered it should be around longer than you are ...
And on the eighth day God created barbecue …. because he DOES love us and he wants us to be happy.
Current smokers: Egor (trailered RF) and Easybake (tabletop pellet drive)
This link will get you to a set of plans for like 17.00 that shows you step by step how to build one without welding and I think in it tells you where to get parts at cost.....
It is straight forward with a few simple tools....no fire bricks....just a straight up coal burner....and yes a diffuser plate can be made with a little effort for it....
If you can't fix it by sheer force or cursing......then it can't be fixed.....
Frank, Part of the reason I asked the above is I saw your kit with the video and am interested in it.
So it sounds like everyone is saying that all that other stuff would be a waste of money, which in a way is good news, because that means it will be considerably cheaper to build. So after the first when I get paid I'll likely build a UDS.
One more question. Is there any compelling reason not to make a fire box door on a uds, to make adding coals or wood easier if needed during long cooks.
~Tom
Working towards becoming a PORKtologist...similar to a Proctologist, in that we often work with butts.
The way mine is built, which is Frank's method, works wonderfully! No need for fire brick or any of that stuff.
As far as a door, it is unneccessary. I have gotten 10 hours out of a 8lb bag of lump, with wood chips mixed in, plus one chimney of lit lump. It was about 60 out that day, with moderate wind, I ran at about 250. No issues at all. After my cook I shut it down and let the fire go out, when I cleaned the uds, i still had some left, not alot but some. My firebasket will prolly hold 15 lbs of charcoal or more, that would go a long time. Just my .02.
Good luck and have fun building!
BBQ is just smoke and beers!
Usually more beers than smoke.
a firebox door looks cool.... but it's major disadvantage is it is one more place to have an air leak. It is really not too hard to remove the basket using a crow bar or a bent stick of roundbar. as you will find out the biggest thing to keep in mind with a UDS is making sure it is tightly sealed. if you have air leaks it will be hard to control.
Thanks guys now I just have to learn how to paint so I can give it a cool paint job with flames painted on the outside like one of the ones I've seen in this sites banner.
~Tom
Working towards becoming a PORKtologist...similar to a Proctologist, in that we often work with butts.
Hope you all don't mind me bringing this thread back up. I am not long from likely purchasing Franks full kit however I have one question. I've noticed several UDS that utilize one or two ball valves attached to pipe(s) running up the side of the drum is there any reason not to utilize such a design?
I like idea of the convenience of having the ball valves further up the side.
~Tom
Working towards becoming a PORKtologist...similar to a Proctologist, in that we often work with butts.
The placement of the valve is purely your choice...lately we have just been putting them on the bottom nipple and not running them up.....but on my R2D2 UDS...I have two valve on stand offs....works either way....
If you can't fix it by sheer force or cursing......then it can't be fixed.....
Hi Guys: I don't no if I mentioned it here before, but not long ago I found an almost new ECB my late fathers shed. So I'm pretty excited as I figure I can use one the grates from it for charcoal grate, and use the handles too in my UDS build which I'm starting to pull the parts for. I already have a Weber Kettle cooking grate for it since I replaced the stock one in my kettle with one of those ones with the sides that flap up for coals. I just purchased franks video this morning and It is well worth the cost.
~Tom
Working towards becoming a PORKtologist...similar to a Proctologist, in that we often work with butts.
How long of a piece of expanded metal do I need to go around a 16" grate. The grate I'm planning on using is from an ECB and the diameter is actually a little smaller than 16 diameter.
~Tom
Working towards becoming a PORKtologist...similar to a Proctologist, in that we often work with butts.