Horizontal offset/ reverse flow build

YouTube · Post by **Frank_Cox** » October 8th, 2011, 4:06 pm

Starting my new project today! I am going to build a horizontal offset slash reverse flow build for us to use at comp's. I will have plans for this build posted on the plans site in the next couple weeks. The cook chamber is going to be 48" long and 30" diameter.
This is going to be great!

Sent from my iPhone using Forum Runner

YouTube · Post by **Frank_Cox** » October 8th, 2011, 5:09 pm

Got the cook chamber welded up. Now for the fire box and end cap

Sent from my iPhone using Forum Runner

YouTube · Post by **Frank_Cox** » October 8th, 2011, 5:37 pm

Got one end cap done

Sent from my iPhone using Forum Runner

YouTube · Post by **Frank_Cox** » October 8th, 2011, 5:57 pm

Cut the fire box hole. Gonna save the cut out for a firebox to cook chamber damper

Sent from my iPhone using Forum Runner

YouTube · Post by **Frank_Cox** » October 8th, 2011, 7:28 pm

Got the fire box cut out and tacked together. Gotta weld her up now.

Sent from my iPhone using Forum Runner

Post by **Tom_Heath** » October 8th, 2011, 7:54 pm

Welp.... its been an hour and 15 minutes ....... no update yet. LOL

Looking good man, I like it. Isn't it gonna be kinda heavy to push up into that big oll trailer.

YouTube · Post by **Frank_Cox** » October 8th, 2011, 8:15 pm

Decided to go ahead and pit this on it's own trailer. Gonna put some cans in the trailer

Sent from my iPhone using Forum Runner

Post by **Tom_Heath** » October 8th, 2011, 9:18 pm

Nice looking Lincoln welder sitting there in the background.

I really think the trailer needs an insulated pellet rig.

YouTube · Post by **Frank_Cox** » October 8th, 2011, 9:49 pm

I think Bubba is gonna use his big traeger and also some cans.

Sent from my iPad using Forum Runner

YouTube · Post by **Frank_Cox** » October 9th, 2011, 1:32 pm

Got the firebox welded up the rest of the way and got the end cap ready to put on. My lil buddy is helping me today. He had to take a break so he found my chocolate pretzels

Sent from my iPhone using Forum Runner

YouTube · Post by **Frank_Cox** » October 9th, 2011, 1:47 pm

Had a little trouble lining up the roll of metal with the end cap so I thought I would post a pic of how I adjusted the roll to line up with the end cap.

Sent from my iPhone using Forum Runner

YouTube · Post by **Frank_Cox** » October 9th, 2011, 2:24 pm

Welds are a little slaggy today.....
Anyway I got the end cap welded on so now I'm gonna attach the fire box.

Sent from my iPhone using Forum Runner

YouTube · Post by **Frank_Cox** » October 9th, 2011, 2:47 pm

Spot on firebox connection! I love it when a plan comes together

Now to tack it in place and weld her up.

Sent from my iPhone using Forum Runner

YouTube · Post by **Frank_Cox** » October 9th, 2011, 7:44 pm

Got the end cap welded on and the door laid out. I cut the top cut for the door and now I am as far as I can go until I get my hinges made. I'll have my bud Down the road cut them out tomorrow nite then I will install them and cut the rest of the door out. After that I will start working on the rest of the fire box stuff.

Sent from my iPhone using Forum Runner

Post by **Tom_Heath** » October 9th, 2011, 8:21 pm

Looking good Frank, but do ya really have to show the forklift all the time?? LMAO

YouTube · Post by **Frank_Cox** » October 9th, 2011, 8:28 pm

sure makes it easy

If ya notice, i even have a palet jack in one of the pics along with the fork lift LOL

Post by **Tom_Heath** » October 9th, 2011, 8:33 pm

Well, since we talked the other night and you told me about the 757 guy, I think I can pass on the forklift. LOL BTW I want one of those really bad......Even thinking about cleaning out the garage.

In that last pic I noticed that maybe you need to armor all the tires LOL

YouTube · Post by **Frank_Cox** » October 11th, 2011, 5:35 pm

Got the hinges cut out for my cook chamber. Gettin ready to weld'em on then I'll cut out the rest of the cook chamber door.

Sent from my iPhone using Forum Runner

YouTube · Post by **Frank_Cox** » October 11th, 2011, 6:09 pm

Hinges tacked in place and door is cut! This thing is takin shape!

Sent from my iPhone using Forum Runner

Post by **Tom_Heath** » October 11th, 2011, 7:31 pm

I sure like the looks of those hinges.

Sent from my MB860 using Tapatalk

YouTube · Post by **Frank_Cox** » October 11th, 2011, 7:34 pm

perty kool Huh?

YouTube · Post by **Frank_Cox** » October 11th, 2011, 8:28 pm

Tom, you better get to postin! you're only ahead of me by 6 posts

MattS · Post by **MattS** » October 12th, 2011, 9:19 am

Sweet build Frank. Those hinges sure are sweet.

YouTube · Post by **Frank_Cox** » October 12th, 2011, 10:33 am

Thanks Matt! I wonder who's idea they were LOL

Post by **Tom_Heath** » October 12th, 2011, 8:10 pm

Lol frank.....computer took a dump with a virus.... and the phone thing sucks.......very sad face...

Sent from my MB860 using Tapatalk

SmokerBuilder.com

Horizontal offset/ reverse flow build

Horizontal offset/ reverse flow build

Re: Horizontal offset/ reverse flow build

Re: Horizontal offset/ reverse flow build

Re: Horizontal offset/ reverse flow build

Re: Horizontal offset/ reverse flow build

Re: Horizontal offset/ reverse flow build

Re: Horizontal offset/ reverse flow build

Re: Horizontal offset/ reverse flow build

Re: Horizontal offset/ reverse flow build

Re: Horizontal offset/ reverse flow build

Re: Horizontal offset/ reverse flow build

Re: Horizontal offset/ reverse flow build

Re: Horizontal offset/ reverse flow build

Re: Horizontal offset/ reverse flow build

Re: Horizontal offset/ reverse flow build

Re: Horizontal offset/ reverse flow build

Re: Horizontal offset/ reverse flow build

Re: Horizontal offset/ reverse flow build

Re: Horizontal offset/ reverse flow build

Re: Horizontal offset/ reverse flow build

Re: Horizontal offset/ reverse flow build

Re: Horizontal offset/ reverse flow build

Re: Horizontal offset/ reverse flow build

Re: Horizontal offset/ reverse flow build

Re: Horizontal offset/ reverse flow build