LouAnne... 1000 gallon standard offset smoker

Post by **Big T** » April 6th, 2018, 9:31 pm

Looking good fellas

What's the deal with the blocked off section in the FB ?

ajfoxy · Post by **ajfoxy** » April 6th, 2018, 9:41 pm

Wow, and plenty of out of position welding too. I don't think I could even get into some of those positions let alone still produce a decent bead. Hats off to you guys. Looking good.

Da_Bear · Post by **Da_Bear** » April 6th, 2018, 10:26 pm

Outstanding!!!

YouTube · Post by **Frank_Cox** » April 7th, 2018, 7:46 am

Morning Fellers!

Big T wrote:Looking good fellas What's the deal with the blocked off section in the FB ?

Those are block off plates at log rack level to make the combustion air go through the coal bed instead of going around and mixing with hot air mass and dropping the Temp before the cook chamber.

This morning we are starting off with some dirty eggs!

Sent from my iPhone using Tapatalk

YouTube · Post by **Frank_Cox** » April 7th, 2018, 7:56 am

Here ya go!
3- sticks of andouille
2- pounds of homemade pork sausage
24- large eggs
2- cans of hot rotelle
And of course tortillas and some Colby jack cheese

Sent from my iPhone using Tapatalk

YouTube · Post by **Frank_Cox** » April 7th, 2018, 8:00 am

TortillaTom already at it...

Cool welding shirt too

Sent from my iPhone using Tapatalk

McBroom · Post by **McBroom** » April 7th, 2018, 8:06 am

Big T wrote:She's definitely going to be a monster!! So is that why you weren't on the Smoke Show ? I missed the first 5-10 minutes and your side kicks never mentioned you other than give you a shout out for creating the whole Smokerbuilder Empire..lol

What’s this smoke show you speak of Big T ??

I Love My 2018 RAM 2500HD 4x4 6.4L

YouTube · Post by **Frank_Cox** » April 7th, 2018, 10:06 am

WELL.....
Actually, we are not hosting the Mid MO Smoke show anymore. There is a new host now. He’s a great guy and is getting his start in radio now.
We will be guests on future shows.

Sent from my iPhone using Tapatalk

YTQBBQINC · Post by **YTQBBQINC** » April 7th, 2018, 10:53 am

That’s one heck of a way to start off your morning!

Sent from my iPhone using Tapatalk Pro

Post by **Big T** » April 7th, 2018, 11:55 am

Frank_Cox wrote:WELL.....
Actually, we are not hosting the Mid MO Smoke show anymore. There is a new host now. He’s a great guy and is getting his start in radio now.
We will be guests on future shows.

Sent from my iPhone using Tapatalk

I was kind of hit and miss on listening during hunting season so it took me a little bit to figure out what was going on.

YouTube · Post by **Frank_Cox** » April 7th, 2018, 7:00 pm

Done for the day. Had a lot of welding and grinding today. Doing a smooth radius finish on the outside welds. Takes some time to get right.

Sent from my iPhone using Tapatalk

Post by **Rodcrafter** » April 8th, 2018, 7:34 pm

That is a pretty cool idea about the intake air. Looking forward to seeing how it works out.

That is going to be awesome with cabinet doors.

Sent from my iPhone using Tapatalk

YouTube · Post by **Frank_Cox** » April 9th, 2018, 10:38 am

Yep, I’m remembering back a thread by SoloQ from back in the day where he did something similar and drastically improved the operation of his pit.

Sent from my iPhone using Tapatalk

Post by **Rodcrafter** » April 9th, 2018, 9:43 pm

I think that was in 2011 or 12 I remember something about it

Sent from my iPhone using Tapatalk

Post by **Big T** » April 13th, 2018, 1:31 pm

The Czar · Post by **The Czar** » April 15th, 2018, 8:09 pm

Little Sunday Grinding

Sent from my iPhone using Tapatalk Pro

Post by **Rodcrafter** » April 15th, 2018, 8:15 pm

You put a lot of steel on that big girl. And a mile of welding.

Looking good

Sent from my iPhone using Tapatalk

YouTube · Post by **Frank_Cox** » April 15th, 2018, 8:22 pm

I got tons of pics. Lots of progress. I just want to make everyone wait to see it till the gathering.
Boy I’m a jerk...

Sent from my iPhone using Tapatalk

Post by **Big T** » April 15th, 2018, 8:25 pm

Where's all the pictures of the Czar working on it ?

Squiggle · Post by **Squiggle** » April 16th, 2018, 3:24 am

Hahaha

Looks so good guys, well done!

YouTube · Post by **Frank_Cox** » April 16th, 2018, 6:40 am

Haha ok I’ll post a couple....
First this, one of theczar...

Sent from my iPhone using Tapatalk

YouTube · Post by **Frank_Cox** » April 16th, 2018, 6:43 am

Here’s more

Sent from my iPhone using Tapatalk

Dirtytires · Post by **Dirtytires** » April 16th, 2018, 10:29 am

Looks like you need a dump truck. It can pull it as well as carry enough wood to keep it lit for a long brisket burn!

Love the damper control.

Post by **Big T** » April 16th, 2018, 4:30 pm

All hail The Czar!! She's definitely a beast. Are you building this one for someone or just another one for the arsenal ?
:LG:

ajfoxy · Post by **ajfoxy** » April 16th, 2018, 4:42 pm

What's the smokerbuilder wheel with the arrow and incremental holes for?

SmokerBuilder.com

LouAnne... 1000 gallon standard offset smoker

Re: 1000 gallon standard offset smoker

Re: 1000 gallon standard offset smoker

Re: 1000 gallon standard offset smoker

Re: 1000 gallon standard offset smoker

Re: 1000 gallon standard offset smoker

Re: 1000 gallon standard offset smoker

Re: 1000 gallon standard offset smoker

Re: 1000 gallon standard offset smoker

Re: 1000 gallon standard offset smoker

Re: 1000 gallon standard offset smoker

Re: 1000 gallon standard offset smoker

Re: 1000 gallon standard offset smoker

Re: 1000 gallon standard offset smoker

Re: 1000 gallon standard offset smoker

Re: 1000 gallon standard offset smoker

Re: 1000 gallon standard offset smoker

Re: 1000 gallon standard offset smoker

Re: 1000 gallon standard offset smoker

Re: 1000 gallon standard offset smoker

Re: 1000 gallon standard offset smoker

Re: 1000 gallon standard offset smoker

Re: 1000 gallon standard offset smoker

Re: 1000 gallon standard offset smoker

Re: 1000 gallon standard offset smoker

Re: 1000 gallon standard offset smoker