Thank you Big T. I cut it to that length cut a hole in the top of the cook chamber in the center and installed it there so the full length is sticking above the CC. It just looked a little tall but I trust the Pit Calc.
Sir the size of the CC is 36”w x 24”d x 25”t. I ran them again and came up with the same 32.68”. Please let me know if you came up with the same. Thank youDirtytires wrote: ↑May 7th, 2019, 9:57 pmYou might want to run your numbers again as one of us is incorrect. I just ran the numbers ang got a round 4 inch stack at only 25.8 inches. It could definitely be me that’s wrong but it’s worth checking.....
Thank you for the clarification sir.Big T wrote: ↑May 8th, 2019, 7:24 pmYou have to know the dimensions of the FB to get the correct stack length. I figured the FB at 112% and came up with a 4'' X 32.25" stack so your current stack length will be fine. I also found that anytime I change the dimensions of the FB, I had to re- enter the stack size before the calculator would update the required stack length.
Your original post only gave 2 dimensions for the cook chamber forcing me to assume it was a tank (I also put in a 110% firebox). Now that you have added a third dimension making it a square cc, I concur with Big T in that all is correct. The discrepancy was caused by the decrease in volume from a rectangle to cylinder.Jim.tucker wrote: ↑May 7th, 2019, 8:41 pmAccording to the Pit Calc. A cook chamber that is 36 x24 should have a 4” stack that’s 32- 11/