Pretty much. The dxf files lay the cuts out on whole sheets of 16 gauge and 1/4 inch. You should be able to take the dxf to a machine/welding shop with a plasma table and get them cut. Cost is gonna vary by who you know and what they know etc. I can get the cuts done for cheap cause I have a friend of a friend who owes favors etc. The bars I cut with a chop saw.
Jeeeez. That's a lot. The entire bill for my gf is less than that. Cheaper to buy yourself a saw and do your own cutting at that price.BurnBern wrote: ↑February 20th, 2019, 12:44 pmHi yes it was £760 excl vat for the standard cut and £880 + vat for the added 6inchs in height. That did not include the tubing. I eventually got them to cut the firebox and chute only but I’m going to build the mini with an added 6 inches. The reason is that I’ll be converting all the measurements to metric and there’s bound to a difference in them. So idea is to build the framework and then cut the plate to size myself.
Sorry I caused confusion this is the cut price including the metal for the sizes on the .dxw file. ( The metal is supplied by the company doing the cutting.)