my not so current build

[KILLSWITCH505]

i started this bad boy in may of last year i'm letting it age like a wine barrel



Filling her with CO2 (keep in mind the car im using is a diesel and not gas i would not recommend this method with a gas engine )


First cut


Second cut


Rolled out into the driveway and lit her from here


Thought it needed some more diesel

LOL J/K PRANK PHOTO it was a new can and never been filled

About 4 hours and 4 loads later


To hell with the pit it’s a S’mores oven




Marking a line




Added some 1/4” X 12” strap


Here is a grinder my old man gave me he said he got it in 79 but senility has set in lol one of the best gifts in the world


My ugly mug


“look Ma it’s a whole A$$hole cooker” -Shawn


Ok guys this is what I'm thinking. the RF plate should help even the temps out (thanks K.A.M.) I might go with 3 grates instead of the 2 shown but other then that let me know what you think

[The Czar]

.....you my friend are the epitome of a smoker builder....

...have you considered becoming a FA BUILDER?

[KILLSWITCH505]

thank you for the kind words

:have you considered becoming a FA BUILDER?

whats an FA builder?

[Frank_Cox]

I Like It! Great concept, I think that could work real well doing the baffle plate that way.
I'll send you a pm bout the FA Builder Program.

Sent from my SAMSUNG-SGH-I727 using Tapatalk

[Gizmo]

That's a great build you got going on there killswitch! really like the idea!

[Tom_Heath]

Dang man.....My slow azz just realized where NM was lmao sorry i'm slow.

I had hopes that you were closer to the mid west.

I LOVE your propane tank build, its awesome.

Just for the record, so that no one would maybe get hurt.
I see the car exhaust being used to purge the tank.

For future readers, this does not work well with newer cars. Emissions now days gets um clean enough that this isn't a good method. Please dont cut a propane tank until you have done the proper research and are 100% confident of your procedures.

Killswitch, please dont take it that I am knocking your method, its clear that you have spent your share of time under a hood and behind a set of goggles. But rather to keep some guy from going ker pow because his car burns to clean.

You'll notice that I kinda like the smoker terms like Ker-Pow and such.
Just sayin.

[TrailerBuilder]

Ahhhh, I remember the big smores oven now Denny (notice I didnt mention anything about the cooker project) That thing is awesome bro and Ive told you a zillion times before you got some killer skills man. Now hurry up and get started back up on that thing. Kevin is about done letting me design on his dime so I need ya now more than ever brother. If you dont hurry Im gonna have to start building my own

[KILLSWITCH505]

thank you Frank

Edna once i get get done with my buddys chop i'll blow the bob webs off the thing

For future readers, this does not work well with newer cars. Emissions now days gets um clean enough that this isn't a good method. Please dont cut a propane tank until you have done the proper research and are 100% confident of your procedures.

Killswitch, please dont take it that I am knocking your method, its clear that you have spent your share of time under a hood and behind a set of goggles. But rather to keep some guy from going ker pow because his car burns to clean.

You'll notice that I kinda like the smoker terms like Ker-Pow and such.
Just sayin.

Tom, no worries my friend. the jetta in the pic is a diesel i will edit my post a little. i really wouldnt want anyone to get hurt or the wrong idea

Troy, lol thanks brother i'm really going to try to get this thing done someday

[The Czar]

So what ever happened with this awesome build you started? And just ignore the smores part...

[shipyardbecue]

nice! can't wait to see more pics of this build!