![Image](https://i.imgur.com/ahqHwMz.jpg)
I am still on the fence how to mount this on a trailer. If I go sideways over the axle it will put it at a good height and the ends will be accessible from each side of the rig. Downside to that is the trailer will be at least 6' wide when it does not have to be. I will have to build up a frame work so it clears the tires as well. Also I may run into parking issues where I don't have the room to get the racks in and out on the sides. If I run it down the middle of a trailer I can make it lower to the ground and narrower for a compact package. I would need a longer tongue on the front to allow the racks to come out the front. Downside to that is the spare tire and jack would have to be located out of the way. I think I want to go inline and low for a more compact trailer and ease of mounting it to a simple frame. I want to make a tray on the trailer to light the fire box's on that will catch the ash. I plan on making up two sets of fire box's so I can use one to pre heat and one to cook with. If I do a long cook I can use the spares to get the next bed of coals primed and ready to go in too.