150 gallon propane reverse flow in the making

DUAYNE B · Post by **DUAYNE B** » April 18th, 2012, 9:21 pm

not really in order, but figuring it out

DUAYNE B · Post by **DUAYNE B** » April 18th, 2012, 9:24 pm

getting ready to cut it open

DUAYNE B · Post by **DUAYNE B** » April 18th, 2012, 9:27 pm

forget what image is

DUAYNE B · Post by **DUAYNE B** » April 18th, 2012, 9:30 pm

fb to cc opening,

DUAYNE B · Post by **DUAYNE B** » April 18th, 2012, 9:32 pm

i took the corners from the circles i cut out and shaped them to the fb,,, perty happy with it so far

DUAYNE B · Post by **DUAYNE B** » April 18th, 2012, 9:35 pm

BP and making of drain spout, havent got the pipe welded in yet, this weekend

DUAYNE B · Post by **DUAYNE B** » April 18th, 2012, 9:39 pm

door back in place, took abit of frustration to get it to fit again,,, using 1 1/2 x 1/4 strap to trim out door, and 1 inch header wrap for gasket, good for 2000 degrees

DUAYNE B · Post by **DUAYNE B** » April 18th, 2012, 9:45 pm

thats where it sits till the weekend, have a couple options on trailers i am waiting for, the cc is 54 x 24 inch, fb is 22 x 24, need to cut fb door and make food racks, dampers for fb to cc and cc, what do ya think about dampers for fb and cc, thought about sliding for cc but dont know yet,,,,,, i just build as i go,

The Czar · Post by **The Czar** » April 19th, 2012, 7:13 am

Its what I am use to using....seems to be the simplest way to control temp...

Smokeone · Post by **Smokeone** » April 19th, 2012, 8:13 am

I like build as you go, that way there are no change orders! ;)

DUAYNE B · Post by **DUAYNE B** » April 29th, 2012, 7:11 pm

howdy all, got more done on smoker today, got the damper in and food racks, it was a hot one today

DUAYNE B · Post by **DUAYNE B** » April 29th, 2012, 7:14 pm

damper closed,,,, i used the piece out of the ends for mating fb to cc

DUAYNE B · Post by **DUAYNE B** » April 29th, 2012, 7:16 pm

open, the son donated one of his bike parts fort the handle, that was nice of him lol

DUAYNE B · Post by **DUAYNE B** » April 29th, 2012, 7:20 pm

got the racks built need to still put stops on them, i get excited when the meat is done and wouldnt wanna fling the racks on the ground...

DUAYNE B · Post by **DUAYNE B** » April 29th, 2012, 7:28 pm

thats my mascot, he is preprepping the cooker, also decoy to attract more pigs,,,,cant wait to fire it up, getting the fb end waterjetted with the door cut out and air vent, will get them tuesday and finish main smoker, then got to clean it all up deburr it and maybe trick wife into scraping the paint off, any ideas on getting that to happen are welcome......

Smokeone · Post by **Smokeone** » April 29th, 2012, 7:46 pm

Nice work there!

Good Luck with getting the help you want, I dont see a viable plan.

DUAYNE B · Post by **DUAYNE B** » April 29th, 2012, 7:55 pm

hmmmmm,,,,,,, might be easier then getting the son to do it, lol

The Czar · Post by **The Czar** » April 29th, 2012, 9:07 pm

Holy Welding Batman.....your like busting it out man!!!

TuscaloosaQ · Post by **TuscaloosaQ** » April 29th, 2012, 10:13 pm

Brother you look like you got it going on yourself, keep on strolling my friend and you will be posting Q view before long

DUAYNE B · Post by **DUAYNE B** » April 30th, 2012, 7:58 am

Thanks S1, you guys have given alot of good ideas and motivation, Dcman, Daughter comes home from corpman school in a couple weeks, so i need to have done to feed all her friends, she is the fire making me get it done, thanks again to you all that post great pics to get ideas from, and a banner will be put on the trailer for smoker builders for the appreciation,,,,, have a great week all

DUAYNE B · Post by **DUAYNE B** » April 30th, 2012, 8:04 am

TuscaloosaQ offer still stand, will add a 3 legged pig in on deal too, the skills your boy has are amazing to say the least

The Czar · Post by **The Czar** » May 1st, 2012, 5:47 pm

DUAYNE B wrote:Thanks S1, you guys have given alot of good ideas and motivation, Dcman, Daughter comes home from corpman school in a couple weeks, so i need to have done to feed all her friends, she is the fire making me get it done, thanks again to you all that post great pics to get ideas from, and a banner will be put on the trailer for smoker builders for the appreciation,,,,, have a great week all

Make sure you don't forget to take pics or I will change your avatar to something bad...

DUAYNE B · Post by **DUAYNE B** » May 1st, 2012, 8:32 pm

Dcman, you already did when you made me Joe Arpaio,,,, i will get more pics if you dont make me him again :bigfoot:

SmokerBuilder.com

150 gallon propane reverse flow in the making

150 gallon propane reverse flow in the making

Re: did it work

Re: did it work

Re: did it work

Re: did it work

Re: did it work

Re: did it work

Re: did it work

Re: did it work

Re: did it work

Re: 150 gallon propane reverse flow in the making

Re: 150 gallon propane reverse flow in the making

Re: 150 gallon propane reverse flow in the making

Re: 150 gallon propane reverse flow in the making

Re: 150 gallon propane reverse flow in the making

Re: 150 gallon propane reverse flow in the making

Re: 150 gallon propane reverse flow in the making

Re: 150 gallon propane reverse flow in the making

Re: 150 gallon propane reverse flow in the making

Re: 150 gallon propane reverse flow in the making

Re: 150 gallon propane reverse flow in the making

Re: 150 gallon propane reverse flow in the making

Re: 150 gallon propane reverse flow in the making

Re: 150 gallon propane reverse flow in the making

Re: 150 gallon propane reverse flow in the making