I should add that my wedding experience is minimal and consisted of some construction related welding with a stick welder 20 years ago... Looking forward to developing some new skills during the build.
Gotta love craigslist...I catch myself looking threw all the stuff for sale nearly every day. Searchtempest.com is a handy tool if your looking for a particular item on craigslist (it searches all the areas nearby)
And if you're having a "New Welder" party just drop me a note and I'll be right over ...
And on the eighth day God created barbecue …. because he DOES love us and he wants us to be happy.
Current smokers: Egor (trailered RF) and Easybake (tabletop pellet drive)
Looks like you got a good deal! that will be a great welder to start with. you may need to do v grooves and 2 passes on thicker stuff but it will work fine. I use a lincoln 180 for thin stuff like UDS drums etc. It works great for that kind of stuff but the lincoln 255 is what I use for bigger MIG jobs.
Thanks - hopefully it will prove to be a reliable machine... I did not get to start testing out my welding skills last weekend. I was out of town all last week on business and did not have time to buy my gas and wire before the weekend. I guess I could have started with flux core but I am hearing from friends that I should expect better results w/ mig / gas. I now have a 20 cf tank of 75/25 and 10# of .035 wire so this weekend should be fun.
GvilleDave, I am going to give you my opinion, for your machine I would go with .030, or .025 wire probablly the .030. you will be able to to carry just as big a puddle with the .030 than with the .035 and use less amps. I would defiently go with hard wire ie ( solid wire) and you are right on with the 75% argon and 25% C02. I think some people call innershield (wire that you do not use gas with) flux core Personally flux core wire is wire that will produce a flux but is used with gases. C02/Argon/C02/ or tri mix I do not speak blindly I worked many many years welding 100% X-ray high pressure piping and pressure vessels,vapor bodies, digesters ect. And beleive you me you can weld downhill with hard wire (mig/Short-arc process) and make welds that are excellent in quality. You just have to know the process. Do not ride the puddle stay on the leading edge of it. Sorry for the long post I just get on my soapbox when it comes to welding!!!!!!!!!!!!! Let me just say this in flux core There is self shielding flux core-Requires no gas and is always run DC straight polarity Then there is flux core that requires gas- always run DC reverse polarity. Any flux core wire requires more heat and amps than soild wire!!!!!!!
Wow - great advice! It was at least 25 years ago that I did any welding and even then it was a little stick welding doing construction work. Excited to practice a little this weekend.
Thanks to TQ I went and swapped my .035 wire for a spool of .030. While out I stopped at Harbor Freight and got a $49 mig cart to set things up and make the rig more mobile...
Today I finally got to try my hand at welding and testedth welder out. I bought some 3/4 x 3/4 x 1/8 angle and cut a few short pieces to play with. Started with a few spot welds on the angle flat. Then tried a bead weld down the length of the flat. Lastly I put 2 pieces side by side and tacked the together before running a bead down the length of the seam. Everything worked good and other than a little shaky start the welds all look pretty good with solid penetration. From here on out my practice will be on my cooker!