Perty good looking drawing you got there JR. I think it's good how you feed the cook chamber from the trailer side and the firebox from off trailer. THe layout looks very workable. Try drawing it on graph paper using the calculator next. That's where I always find out how it will really look and if I've allowed enough room here and there for the important stuff. If your FB gets to crowding your tires you can move the axle forward and build in a heat shield in the inside of the fender and flip out steps so you enter the trailer directly over the wheel…. fwiw
And on the eighth day God created barbecue …. because he DOES love us and he wants us to be happy.
Current smokers: Egor (trailered RF) and Easybake (tabletop pellet drive)
All I can say is Roll tide Roll!!!!!!!! like the cooker although I am not a big fan of tuning plates many people love em!!!! Reverse flow all the way for me. Where in Bama R U I am a T Town boy!!!!!!
What do you not like about tuning plates ? I'm planning on making the tuning plates out of formed channel shaped 1/4 inch plates to double as a charcoal tray for grilling. Whats you favorite Ttown BBQ joint?
Tuning plates are awesome but a pain in the ass to make and then "tune".....some guys just don't have the patience for that....and I think I know some body who went to the butt hut in Alabama....the place I'm thinking of is a number one proctologist clinic....
And on the eighth day God created barbecue …. because he DOES love us and he wants us to be happy.
Current smokers: Egor (trailered RF) and Easybake (tabletop pellet drive)
I don't see any problem with your idea. As a person using tuning plates, I really like them mine are thicker than your plans but not channel. I would make sure that since it will be tuning plates you have a way figured in for the grease to be diverted from the back side of the CC to the FB. I know it looks like you have it covered on the front but I don't see anything on the back. If grease runs down the back wall and gets to your FB it may catch on fire, inside the CC. It should be able to cook for many people at one time.
Last edited by Rodcrafter on May 16th, 2013, 7:16 am, edited 1 time in total.
Current Smokers: Backyard RF Offset and Hybrid RF Offset trailer rig with Cowboy cooker and fish fryer, always room for more........
What I do not like about tuning plates is I like a set it forget it system like reverse flow. Reverse flow in my opinion is so much easier to clean. I will never have a problem with a grease fire. Tuning plates you will need a grease bridge at your firebox end. I do not like the idea of having to screw with something to make it cook. Now Many people love em ain't for me!!!!!!!
Yes, you could take a piece of 1/4" plate 6 inchs wide by the full lenth of your CC with an 1" lip facing down, you could weld this at the top of your FB opening with the lip facing down. If you didn't want it to have a lip, just angle it down a bit to cause the grease to run away from the back wall. This would become sort of a defuser/drip guide, it would guide the grease and also even out your temps across your tuning plates. Seems good to me.
My $0.02
Current Smokers: Backyard RF Offset and Hybrid RF Offset trailer rig with Cowboy cooker and fish fryer, always room for more........