Reverse flow smoker

Super B · Post by **Super B** » November 24th, 2015, 9:10 pm

Heres the sign after laser cutting. Had the T look like a syringe, as he has injected my bad back thousands of times. Thanks to him, my 2 blown discs give me very little trouble..

Super B · Post by **Super B** » November 24th, 2015, 9:12 pm

Right out of the powder coat oven at our shop

Super B · Post by **Super B** » November 24th, 2015, 9:13 pm

About got it

Super B · Post by **Super B** » November 24th, 2015, 9:14 pm

He graduated from Univ. of Ga as pharmacist before becoming a doc. Loves UGA, so had to make it a dawg cooker...

Super B · Post by **Super B** » November 24th, 2015, 9:17 pm

Heres a dawg i freehanded with the plasma.. harder than i thought it would be. Made it at the last minute. I also cut 8 Ga G's out of stainless and welded them to grate on the charcoal side to brand his meat but forgot to take the pic....

Super B · Post by **Super B** » November 24th, 2015, 9:19 pm

Strap is holding down door on the gasket..just put it on and had to deliver the smoker

Super B · Post by **Super B** » November 24th, 2015, 9:20 pm

Even threw a little bit of wood on there when i delivered it..

Super B · Post by **Super B** » November 24th, 2015, 9:23 pm

Turned out ok i guess for my first smoker and first trailer from scratch. Pulled nice and straight. Wish I would've had more time to do a few more things but just run out of time. From blast to powder coat to finish i pulled off in 4 days as his surgery was approaching. He didn't get to use it before surgery in August, but he's slowly healing and I hope he can use it soon..Thanks for the help guys..it tested out perfectly.

Super B · Post by **Super B** » November 24th, 2015, 9:24 pm

Everyone asks why all the smoke stacks, they don't even notice they are counter weights

Post by **Rodcrafter** » November 24th, 2015, 9:35 pm

Looks great

Making memories.

Post by **Pete Mazz** » November 25th, 2015, 4:25 am

4 days??? I'm going on 3 years....

The Czar · Post by **The Czar** » November 25th, 2015, 9:37 am

Sweet looking little rig...hopefully the guy will let you know how it cooks! And have them take pictures otherwise it never happened

Post by **Big T** » November 25th, 2015, 7:32 pm

forty_creek · Post by **forty_creek** » November 30th, 2015, 10:55 pm

Strong Work!!

Drankin, Smokin and Dreamin

Sent from my iPhone using Tapatalk

Post by **Rodcrafter** » December 1st, 2015, 8:09 am

Get busy Pete! lol

Making memories.

Post by **Pete Mazz** » December 1st, 2015, 5:18 pm

Rodcrafter wrote:Get busy Pete!

I know! I just can't get motivated these days.

Post by **Rodcrafter** » December 2nd, 2015, 6:49 am

Just do a little once in a while and it will get there. Building these rascals are a lot of work for sure. But well worth the trouble. Go for it!

Making memories.

SmokerBuilder.com

Reverse flow smoker

Re: Reverse flow smoker

Re: Reverse flow smoker

Re: Reverse flow smoker

Re: Reverse flow smoker

Re: Reverse flow smoker

Re: Reverse flow smoker

Re: Reverse flow smoker

Re: Reverse flow smoker

Re: Reverse flow smoker

Re: Reverse flow smoker

Re: Reverse flow smoker

Re: Reverse flow smoker

Re: Reverse flow smoker

Re: Reverse flow smoker

Re: Reverse flow smoker

Re: Reverse flow smoker

Re: Reverse flow smoker