Thanks big T, that really means a lot to me. I really appreciate all the good advice and will put it to use.
I got some more time today to work on the counter weight for the cc and the rest of the handles welded on. It was a good experience for me. I used 1/4”x2” c channel and a piece of 1/4”x2” flat strap and welded them together to get a strong arm for the counter weight. Welded and grinded it smooth then used a 3’ piece of 1/8x4x4” and welded them together. Once I had it where I needed I added some scrap pieces of steel and got the weight I wanted to balance the cc door then welded caps on it.
Thank you for the compliments fellas, this has truly been a labor of love. This project is giving me two main things: a tool to continue smoking meats. And second it is giving me the opportunity to learn how to mig weld. It started off only as me having a buddy fab me up a smoker, but ended up not only giving me a smoker I will have for years. It also created a passion for welding and metal work. Giving me a reason to pick up another skill that I can benefit from. If I wouldn’t of found this great forum I would’ve have never attempted this journey in the first place. Again I thank you all for all your words of wisdom. This is such a great forum!!
So back to shop talk: what seems to be the best location to place me temp gauges. I have two that I am going to use just to track any difference in temp from one side to the other. They will be on the cc door but where is the best location to mount them. I am going with 2- 3” river country temp gauges if that makes a difference??????
I’m sorry I haven’t gotten back to you until now. I like my temp gauge as close to the cooking rack as possible so I have an accurate idea of what the meat is experiencing. As for the fire basket. I have to say I like heavy stuff, that being said the bottom is not square tube its solid square stock. I make the shape of the ends then stand them up and clamp them to the welding table and lay the bottom out and tack it in place and tack the top angle slides in place. Then weld it all up and lastly cut the 3/4x9 in as replaceable pieces
Making memories!
Current Smokers: Backyard RF Offset and Hybrid RF Offset trailer rig with Cowboy cooker and fish fryer, always room for more........
RC thanks for getting back with me on the fire basket. Being a newb at all of this (including welding) how would I make the expanded metal replaceable, I assume just a few tacks that can be cut off and grind down? How often do you find yourself replacing the 3/4x9? And lastly (for the moment) I have two racks in my pit, would I place the temp gauges between the top and bottom racks or place them both above the top rack?i added the pic for quick reference.
I would split the difference seeing as you have your handle already mounted unless you wanted one on each side of the handle. I done several test fires and checked temps with my maverick before I ever cooked anything just so I would know what was really going on and now I know what the temp zones are based on my single door gauge. The temps end to end are usually within 5 degrees but the top rack is about 10-15 degrees hotter than the bottom. I know you are ready to be done but if I could recommend 1 more thing to add it would be a drip ledge to the inside of the door. These traditional doors are bad about the grease splattering on the door and dripping down the front of the cooker. I believe that I have a picture of mine and I'll try to add it in a few minutes so you can see what I'm talking about.
Are you kidding Big T, I am always looking for an excuse to use my welder and get more welding time!!!!! I saw that edge before on another smoker but wasn’t sure of it purpose. Would 1/8” suffice or should it be 1/4”? As far as the temp gauges would it be better to put one towards the top and the other near the bottom cooking grate? When testing the temps in different places around the pit how long does the probe need to be in place to get an accurate reading? I am ready to put this bad boy to the test and see what it will do, but I also want to make sure I am getting it built right and not end up with regrets and have the “would’ve, should’ve, could’ve” deal.
I have the day off tomorrow and will be putting more time in on the iron dragon getting her closer to breathing fire and smoke.
As always thanks for the advice Big T and RC.
That will work fine. I like to put it as close to the rack as I can. There's a lot of moisture in these cooking chambers both from the wood and the cooking, it just runs down the door and drips out the front without this part. I mean these rascals get nasty enough without that. Even if its a good sorta nasty.
jm2cw
Current Smokers: Backyard RF Offset and Hybrid RF Offset trailer rig with Cowboy cooker and fish fryer, always room for more........
I have been going over this build trying to think of anything else I need to weld on it before moving it out of the garage. The only thing I have left to do is put on the temp gauges. Which means tomorrow night is the big night. I plan on moving it out and burning it in!!!! I plan to do several burns in it before I season it. The question I have (Big T this is a discussion we talked about) if I only do a fire in the fire box and get it really hot, and do this the next several nights after work would that do the trick of getting all of the old propane funk out of the pit or do I need to have a fire in the cc. I would prefer not to have a fire in the cc because I don’t want to take a chance of warping the cc door.
I'm no pro when it comes to propane tanks but your tank appears to be fairly clean of any residue so I would think that if you don't have a bad smell you could get buy with a few hot burns. If you get it hot a few times and that doesn't seem to work then you could do the fire in the CC as a last option.
I don’t know much about propane tanks either. I do know Frank and some others used to get them soda blasted after cutting them open. But since you are this far along BigT is probably right.
Making memories!
Current Smokers: Backyard RF Offset and Hybrid RF Offset trailer rig with Cowboy cooker and fish fryer, always room for more........
Got home from work tonight and decided that tonight is the night!!!!
This is my very first burn. I ain’t going to lie, it’s pretty sweet watching this thing breathing fire and smoke and coming to life. THIS IS AWESOME!!!!!
Learning generally boils down to "Repetition or the avoidance of pain", some people learn by doing, some by watching and some just have to pee on the electric fence.
Whether you think that you can, or that you can't, you are usually right. Henry Ford
Thanks fellas!!!!! It’s night #2 burn. I burned the fire pretty hot last night and could smell the propane smell from its former life. I checked it this morning before work to see if I could smell propane in the cc after that burn. I couldn’t really smell any but decided to stick with the original plan and burn it hot several times before I season it.
Question: what is the best method for seasoning my pit? What tips or tricks do you guys recommend or use????